The Universal Seal series pumps are similar to the Heavy Duty series, offering thrust control and adjustable rotor clearances to compensate for wear and viscosity. An enlarged bearing housing at the rear of the pump provides easy drive-end access.
Accepts various sealing options including: Packing, Component Mechanical Seals, Cartridge Single-Mechanical Seals Cartridge Double-Mechanical Seals and Cartridge Triple-Lip Seals
Standard-jacketed pumps are typically used for "melting" ambient temperature solids, like asphalt, within the pump prior to startup. These pumps feature a jacketed bracket and head.
Fully-Jacketed pumps are used in those same applications, plus applications where superior temperature control and faster startup is critical, such as pumping ABS, epoxy and PET resins. These pumps feature jacketed flanges and casing, along with jacketed
Materials of Construction Options : Cast Iron, Ductile Iron, Steel Externals, Stainless Steel Port size Available : 1.5-8 inch
The High Speed Compact series pumps are of a Heavy Duty design, with thrust control and micrometer adjustments for accurate rotor positioning. Designed to operate at motor speeds, they are offered in a close-coupled version for minimum footprint. Component mechanical seals are standard, along with integral pressure relief valve.
Materials of Construction Options : Cast Iron, Steel Externals, Stainless Steel (foot mount only)
Port Size Available : 1-3 inch
The General Purpose pumps utilize a simple and economical "floating rotor" design, in which the rotor/shaft is not retained by a thrust bearing, and is allowed to "float" within the pump head. This model is well suited to many medium duty applications.
The Asphalt Pump series are economical General Purpose pumps utilizing a "floating" rotor design. The jacketed head and rotor bearing sleeve are designed to allow passage of saturated steam or heat transfer fluid to melt asphalt that has solidified in the pump prior to startup.
Sealing options include : Packing, Cartridge Lip Seal, Cartridge Single Mechanical Seal, Cartridge Single O-ring Seal, Cartridge Double Mechanical Seal, Cartridge double O-ring Seal Materials of Construction : Cast Iron Port Size Available (General Purpose) : 0.25-5 inch Port Size Available (Asphalt Pump) : 1.5-5 inch
The Viking Mag Drive® series of sealless internal gear pumps eliminate the possibility of shaft leakage by eliminating the seal. Mag drive pumps are used wherever leakage is a problem, such as acids, volatile organic chemicals, or toxic fluids
Materials of Construction Options : Cast Iron, Steel Externals, Stainless Steel
Port size Available : 1-6 inch
The Abrasive Liquid series pumps are designed to maximize pump life handling paints, inks and other abrasive liquids. With hard materials of construction, these pumps have doubled and tripled the service life of a standard pump
Materials of Construction : Cast Iron (hardening options available for casing and head)
Port Size Available : 0.5-6 inch
Designed exclusively to handle ammonia and other low vapor pressure fluids in both refrigeration and transfer applications, these pumps are operated at low speeds to minimize flashing. They feature double mechanical seals with pressurized seal chamber and oil reservoir to prevent release of gas to atmosphere.
Materials of Construction : Cast Iron
Port Size Available : 1.5-3 inch
The LP Gas series pumps are designed and UL listed for handling LP gas (propane) or butane for bottle filling, vehicle fueling, bulk plant transfer and truck-mounted service. They are built for intermittent transfer services, not for continuous duty or suction pressures above ambient temperature vapor pressures. All feature mechanical seals and pressure relief valves.
Materials of Construction Options : Cast Iron (sizes FH - HL) Ductile Iron (sizes AS – LL)
Port Size Available : 1-3 inch
Viking's Spur Gear series pumps are ideal for low-capacity, high-pressure, motor-speed applications. All pumps increase by capacities of 40%, so there is always a pump within 20% of your capacity needs. These pumps offer lips seals, mechanical seals or Mag Drive® options.
Double pumps offer two independent pumping units operated from a single power source to reduce equipment costs. These may be used to pump from one fluid source to two applications, two fluids to two applications, or for proportioning two fluids together. Standard pumps do allow some mixing within the pump, but optional seals are available to prevent mixing if needed.
Material of Construction Options : Cast Iron, Ductile Iron (SG-05 and -07 series)
Port Size Available : Single : 0.375 – 1.25x1.5 inch Double : 0.5-1 inch
Lid-Ease® Basket Strainers
The Viking Lid-Ease® strainers provide protection for any pumping system by preventing solids or foreign materials from entering the pump. Port options include grooved, tapped or flanged. Optional magnetic inserts are available for trapping ferrous particles, and optional differential pressure indicators are available for monitoring when the basket needs to be cleaned.
Materials of Construction Options - Aluminum : 2-4 inch Cast Iron : 0.75-8 inch Ductile Iron : 2-6 inch Stainless Steel : 0.75-6 inch
All baskets are 304 or 316 Stainless Steel. Maximum temperature on all models is 400oF (204oC).
VIKING Gear Reducer
Single Reduction Gear Reducer
Design Features : Viking offers three sizes of helical gear reducers to reduce standard driver speeds to match pump (or other driven equipment) requirements.
Adjustment slots on the mounting brackets allow the reducers input (high speed) shaft height to swivel to adapt to a variety of motor frames, while the output (slow speed) shaft height corresponds to typical Viking Pump shaft heights.
Double Reduction Gear Reducer
Design Features : Viking offers ten sizes of in-line, double reduction gear reducers to reduce standard driver speeds to match pump (or other driven equipment) requirements. With the in-line design, the input (high speed) shaft is on the same centerline as the output (slow speed) shaft.
All sizes are available with solid input shaft, and sizes 11 through 60 are available with NEMA C-flange motor mount or IEC flange motor mount on the input side.