Our Products

Home / Our Products

LC PD Meter // Turbine Meter // Batch Controller // Vane Pump by 'Corken'


Liquid Controls Group

The Liquid Controls Group (LCG) supports our customers worldwide with a 360° orientation around precision management of high-value fluids and gases.
Our extensive line of Pumps, Compressors, Meters, Registers, Presets and Automation Software combine to provide a safe, productive and energy efficient transfer process for liquids and gases.

LCG products and services include a wide range of terminal industry solutions that can be custom integrated to fit your application and needs. For more information about LCG Integrated Terminal Solutions

Liquid Controls Group ผู้ผลิตมิเตอร์ LC Meter เป็นที่รู้จักในแวดวงอุตสาหกรรมมานานกว่า 45 ปีในประเทศไทย โดยผลิตภัณฑ์ของทาง Liquid Controls Group ประกอบไปด้วยอุปกรณ์วัดคุม สูบจ่าย และอุปกรณ์ควบคุมอย่างครบถ้วน เช่น

Positive Displacement Flow Meter (PD Meter) พีดี มิเตอร์ เป็นมิเตอร์ที่ใช้หลักการแทนที่ในการวัด นิยมใช้สำหรับการวัดเพื่ออ้างอิงการซื้อขาย เนื่องจากมีความแม่นยำสูง นิยมใช้มากๆ ในการวัดของเหลวเพื่อจ่ายรถบรรทุก หรือเรือ หรือใช้วัดเพื่อใช้ในการผสมในงานที่ต้องการอัตราส่วนที่แน่นอน 
Turbine Meter (เทอร์บายมิเตอร์) เป็นมิเตอร์แบบใบพัดเป็นที่นิยมใช้ในการวัดของเหลวที่ไม่มีความหนืด รวมถึงก๊าซด้วย ตัวอย่างเช่น งานวัดปริมาณก๊าซ งานวัดน้ำมัน งานวัดน้ำ ฯลฯ 
Electromagnetic Flow Meter (อิเล็กโทรแม็กเนติก มิเตอร์) เป็นมิเตอร์อเนกประสงค์ที่สามารถวัดของเหลวได้เกือบทุกชนิดที่มค่าการนำไฟฟ้ามากกว่า 5 uS/cm หรือพูดง่ายๆ ก็คือวัดของเหลวได้ทุกชนิดยกเว้น De-mineral Water หรือน้ำที่เอาประจุออกไปหมดแล้ว ดังนั้น มิเตอร์ชนิดนี้จึงนิยมใช้กันอย่างกว้างขวางไม่ว่าในกระบวนการทางเคมีทั่วๆ ไป น้ำเสีย น้ำดี ฯลฯ 
Electronic Register (Batch Controller) เป็นอุปกรณ์ที่ใช้ร่วมกับ Flow Meter เพื่อตั้งค่าการสูบจ่าย เพื่อกำหนดปริมาณของเหลวตามที่ต้องการในการจ่ายแต่ละครั้ง อุปกรณ์ชิ้นนี้มีความสามารถที่จะสั่งปั๊ม หรือวาล์ว ได้อย่างอิสระ (ขึ้นอยู่กับรุ่น) 
Vane Pump เป็นปั๊มที่ใช้กับของเหลวนิยมใช้ในงาน น้ำมัน, Solvent, LPG ฯลฯ เป็นปั๊มที่ต้องการ NPSH ต่ำ นิยมใช้ในงานสูบจ่ายลงรถบรรทุก เรือ ฯลฯ ที่ไม่ต้องการแรงดันสูง แต่ต้องการปริมาณมากๆ อีกทั้งยังสามารถต่อกับเพลารถบรรทุกได้โดยตรง จึงสามารถติดตั้งบนรถบรรทุกได้ (Truck Pump)

Liquid Controls Positive Displacement Flow Meters and Accessories

Design Features

Meters provide exceptionally accurate service when using Liquid Controls' unique positive displacement metering principle, even under variable operating conditions (changes in temperature, pressure and viscosity). Provides the energy efficient and functional performance desired from an economical volumetric measuring instrument. Available with traditional mechanical seal or glandless magnetic driven pulse output device. A wide range of accessories are available to meet almost every metering need.


- High accuracy and repeatability
- Low maintenance, no metal-to-metal contact in measuring chamber
- Low pressure loss, a true gravity flow meter
- Choice of aluminum, cast iron, and stainless steel materials of construction
- Self-contained operation without electrical power or signal conditioning (for units equipped with mechanical registers, printers or presets); no special piping requirements
- Electronic output and registration equipment where enhanced accuracy and electronic communications are needed
- Weights & Measures approval (world-wide) for custody transfer with mechanical or electronic registration systems meeting API standards
- Electronic accessories designed and approved to Class 1 Div. 2 standards


Accuracy / Performance:
Electronic Registration Linearity:
- Capable of ±0.10% over a 5:1 range
- Capable of ±0.10% over a 10:1 range
- Capable of ±0.15% over a 40:1 range
Mechanical Registration Linearity:
- Capable of ±0.125% over a 5:1 range
- Capable of ±0.22% over a 10:1 range
- Capable of ±0.5% over a 40:1 range
 - Capable of 0.02% or better at any flow rate over entire range
Sizes: 1 1/2" through 6"
Flow Rates: 5 GPM through 1,000 GPM
End Connections: ANSI Flanged, NPT, BSPT, Slip Weld
Pressure Ratings
M-Series and MA-Series Cast Case: 150 & 350 PSI non shock working pressure

MS-Series Two Case Steel Case: 150/150, 150/275, 300/300, 300/720 PSI; 600/1440 ANSI non-shock working pressure


**Click** for PD Meter Catalog


Specification Sheet

Instruction Manual

       M-MA Meters Manual

       MS Meters Manual

       Gear Plate Selection Guide

       7886/7887 Mechanical Register

       Mechanical Printer

       7889 Mechanical Preset

Turbine Flow Meter

For your complete Liquid and Gas Flow Measurement needs and increased accuracy, efficiency, and  service life, Sponsler provides a complete line of high quality, precision turbine flowmeters to meet virtually all flow measurement applications.   Sponsler flowmeters respond to factors such as viscosity, corrosive media, extreme temperature,and hazardous materials. Sponsler flowmeters are available in stainless steel, corrosive series and feature a hydraulically balanced turbine for rugged, compact constructionallows for the most accurate and reliable measurement available.

Sponsler  will custom design flowmeters for your special needs whether for blending, batching, filling, totalizing, data logging, flow control loops, or other automated process control functions.   Let Sponsler design a flow meter based measuring system tailored to your specifications.



       Complete Product Overview

       IT400: Remote Rate Indicator / Totalizer

       Cryogenic Products

       Lo-Flo Series Flowmeters

       Sanitary Series Flowmeters

       Multi-Function Flow Computer

Instruction Manual

       IT400: Remote Rate Indicator / Totalizer 

       Multi-Function Flow Computer

       Precision Turbine Flowmeter IOM

Electromegnetic Flow Meter

Design Features

The LCMag family of electromagnetic flow meters offers the best solution for measuring the flow of electrically conductive liquids (5µS/cm minimum). The sensor consists of a stainless steel pipe section internally lined with insulating material. PTFE, Polypropylene and Ebonite (hard rubber) liners are available. The two electrodes are positioned opposite each other on the internal surface of the pipe. The coils which generate the magnetic field are placed outside the pipe. The complete sensor has an external NEMA 6-6P (IP67/68) protection rating which guarantees the integrity of the magnetic circuit and protects the instrument against the external environment. The choice of materials in contact with the fluid (lining, electrodes, etc.) depends on the temperature, the chemical aggressiveness of the liquid and the degree of abrasion of the liquid.

       No moving parts

       Wide range of nominal diameters from 1/8" to 80"

       Wide range of flow rates from 0.11 GPM to 400,000 GPM

       Wide range of liner and electrode materials

       Near zero pressure drop

       Easy installation and operation

       Minimal maintenance

       Accuracy is not affected by fluid characteristics such as viscosity, density, temperature, or suspended solids


       Sizes: 1/8" through 72"

       Flow Rates: 0.11 through 400,000 GPM

       End Connections: ANSI Flanged, Wafer, Threaded, Tri - Clover (sanitary)

       Pressure Ratings: 150 - 300 ANSI

       Accuracy: Capable of ±0.2% of rate over 10:1 range for flow velocity between 6 to 33 feet per second

       Repeatability: Capable of 0.1% of full scale

       Certifications: HMS 2410 Series models 3-A certified.



       LCMag Product Overview

Specification Sheet

       IS200-10 (HMS501 Micro-Flow LCMag)

       IS200-20 (HMS600 Micro-Flow LCMag)

       IS200-30 (HMS1000 Wafer LCMag)

       IS200-40 (HMS2410 Sanitary LCMag)

       IS200-50 (HMS2500 Flange LCMag)

       IS200-60 (HMS3700 Insertion LCMag)

       IS200-70 (HMS5000 Pipe Clamp)

       IES200-50 (HML250)

       IES200-40 (HML210)

       IES200-20 (HML110)

       IES200-10 (HML3-F1 Converter)

'LectroCount™ LCR 600' Electronic Preset Counter

The LectroCount™ LCR 600, the latest edition of Liquid Controls’ popular LectroCount™ line of electronic registers, is loaded with advanced functionalities that can produce real savings for your bottom line. New features—such as the large 5.7" QVGA display and the alphanumeric keyboard—enable valuable new functionalities like the full-featured point-of-sale (or POS, an optional upgrade), instant diagnostic messaging, and customized delivery screens.  The LCR 600 is a standalone unit; no extraneous lap top or a lap pad is required. All configurations—including calibration, system setup, and point-of-sale (POS)—can be entered using the alphanumeric keypad.


REPEATABLILITY: Capable of .03% of reading over entire range.
LINEARITY: Capable of ±0.10% or better over a 5:1 range from maximum nominal meter capacity.
LINEARITY: Capable of ±0.10% or better over a 10:1 range from maximum nominal meter capacity. 
LINEARITY: Capable of ±0.15% or better over a 40:1 range from maximum nominal meter capacity.

Due to the capabilities of multi-point calibration for meters equipped with LectroCount™Electronic Registration, superior accuracy (linearity) can be provided as indicated above.

NOTE: Accuracy obtainable when all variables remain constant. Reading/ measurements must be equal to a minimum of one minute of flow at selected rate(s). All accuracy statements based on metering Stoddard Solvent, approximate viscosity 1 CPS. On higher viscosity products, the average deviation in accuracy will be even less.

Power Requirements:
LectroCount® LCR-II: +9 - 28 VDC
LectroCount® LCR 600:  +9 - 28VDC

Enclosure:  Class 1, Division 2, Group C&D design, Nema 4X
Operating Temp Range:  -40° to 158°F (-40° to 70°C)

US Weights & Measures:  LCR-II and LCR 600
Measurement Canada:  LCR-II, LCR 600 

Printer:  Epson, Okidata and Blaster Models

Power:  +9 to 28VDC, 3A maximum (including solenoid valves)

Temperature input: 4-Wire Platinum RTD
Pulse Inputs:  +5 to 28 volt peak to peak, open collector, single channel or quadrature

Control Valve (2):  Open drain transistor for 2 stage valve control, 1A Max. per channel
Auxiliary (2):  Open drain transistor for general purpose auxiliary control.  Aux(1) 1A Max, Aux(2) 150mA Max
Scaled Pulse Output:  Open drain output, 1 A Max.


       Electronics Brochure


       LCR 600 Specifications

Instruction Manual

       LCR 600 Installation

       LCR 600 Setup & Operation

Features :

LCG Corken Vane Pump

PT-Model Sliding Vane Pumps 

       Designed specifically for petroleum products and industrial solvents 

       Unlike the CP- and CD-models, the cam and sideplates are not replaceable 

       Adjustable internal relief valve 

       Fewer mechanical sealing options than the CP- and CD-models. 


Operating Specifications 

         Flow rates up to 263 gpm (995 l/min) 

         Working pressures up to 200 psi (13.8 bar) 

         Differential pressures up to 125 psi (8.6 bar) 

         Temperature range: -25 to 300 °F (-32 to 149 °C) 

         Viscosities up to 20,000 SSU (4,250 cSt) 



       Sales Brochure 

       Installation, Operation & Maintenance Manual (IOM) 

       Specifications (operating & material) 

       Outline Dimensions 

       Performance curves 

       Parts Details 

PZ-Model Sliding Vane Pump Overview

The PZ-Series sliding vane pumps are specifically designed for petroleum products and industrial solvents. Thisindustrial pump line is ideal for bulk pump loading and unloading, fuel oil delivery truck, and transport applications. Suitable liquids include petrochemicals, fuel oil, gasoline, biofuels, ethanol, solvents and many more.

Unlike the CP- and CD-models, they do not come with a replaceable cam; however, you can replace the sideplates. They have an adjustable internal relief valve and fewer mechanical sealing options than our CP- and CD-model pumps. Available in 2” and 2.5” sizes.


Operating Specifications 

       Flow rates up to 165 gpm (624.5 l/min) 

       Working pressures up to 200 psi (13.8 bar) 

       Differential pressures up to 125 psi (8.6 bar) 

       Temperature range: -25 to 300 °F (-32 to 149 °C) 

       Viscosities up to 20,000 SSU (4,250 cSt) 



       Sales Brochure 

       Installation, Operation & Maintenance Manual (IOM) 

       Specifications (operating & material) 

       Outline Dimensions 

       Performance curves 

       Parts Details 

Z-Model Sliding Vane Pump Overview

The Z-Series Coro-Vane® pumps, the newest line of sliding vane pumps offered by Corken, are designed with our patented needle roller thrust bearing rated for 4,000 lbs. The needle roller thrust bearings protects the pump against dynamic impact loads imposed on the pump by the drive system. Premature failures due to axial thrust loads are minimized on truck applications. They have O-ring construction throughout and are rated for 400 psi (28.6 bar) working pressure. Since the Z-models sliding vane pumps are used primarily in LPG (propane & butane) and agricultural ammonia applications, the non-adjustable internal relief valve is pre-set at the factory.

When the application requirements are suitable, Z-model pumps are a great option for many other liquefied gases with high vapor pressures such as natural gas liquids (NGLs), refrigerants, CO2, and many more. Applications include bulk pump transfer, propane delivery truck and transport. Available in 2”, 2.5”, 3” and 4” sizes.


Operating Specifications 

       Flow rates up to 385 gpm (1,457 l/min)

       Working pressures up to 400 psi (27.6 bar)

       Differential pressures up to 125 psi (8.6 bar)

       Temperature range: -25 to 225 °F (-32 to 107 °C)

       Viscosities up to 20,000 SSU (4,250 cSt)



       Sales Brochure (Z4500)

       Sales Brochure (Z3500)

       Installation, Operation & Maintenance Manual (IOM)

       Specifications (operating & materials)

       Outline Dimensions

       Performance curves

       Parts Details

TopTech Batch Controller

MultiLoad II is a multi-arm, multi-meter, multi-product, multi-additive meter register. As a batch controller, MultiLoad II delivers straight product or multi-product recipes using ratio, sequential, and various hybrid blending methods. The MultiLoad II is a multi-solution batch controller and handles loading, dispensing, and tracking high value fluids and gases.


         Control up to 12 loading arms

         Up to 5 meters and 16 additives per arm

         Internal I/O options

         Scaled for 1-2 arm applications

         Modbus interface with Krohne mass meters

         Wireless communication options

         Multi-lingual interface

         Color display

         Alphanumeric keypad options

         Integrated card reader options

         Powerful stand-alone operation


MultiLoad II was designed to improve the traditional preset model by offering a number of key benefits, such as: ease of use, powerful stand-alone operation, seamless integration with automation systems, near limitless scalability, and powerful features.

         MultiLoad II eliminates the traditional card lock system with its built in card reader.

         MultiLoad II reads driver proximity cards.

         MultiLoad II replaces the traditional preset and meter registers.

         MultiLoad II replaces anywhere from one to twelve preset and meter registers depending on the customer’s unique needs.

         MultiLoad II saves time and money with anytime, anywhere access and remote control.

         24 hours a day, from anywhere in the world MultiLoad II can be accessed via the internet to view the real-time meter activity, logs, alarms, and configurations.



       MultiLoad II Brochure

       FCM Brochure

       MultiLoad II SCS (Skid Control System) Brochure


       MLII_SMP_Installation Guide


       FCM2_Installation Guide

       MLII_SCS_Installation Guide





       Multiload II Communications Manual_fv_3_4_31_11

       MultiMate Users Guide v4.31.19




LC Preset & Digital Valve from CLA-VAL

The Basic 500 Series Valve is a hydraulically-operated, diaphragm-actuated valve available in globe or angle patterns, a full range of sizes and various materials. It consists of three major components: a body, a cover and a diaphragm assembly. The diaphragm assembly is the only moving part. When pressure is applied above the diaphragm, a synthetic rubber disc, contained on three and one half sides by a disc retainer and disc guide, forms a seal with the valve seat. At the same time, the diaphragm assembly forms a sealed chamber in the upper portion of the valve, separating operating pressure from line pressure. The Basic 500 Series Valve’s rugged simplicity of design and packless construction assure a long life of dependable, trouble-free operation. Should the diaphragm become damaged, the valve closes tight providing “fail safe” operation. A versatile valve, the Basic 500 Series Valve is used in many types of piping systems requiring remote control, pressure regulation, solenoid operation, rate of flow control, liquid level control, or check valve operation.


Download Specification

       MS400-80 (500 Series Valves)

Features :