Home / Our Products
Our Products
Kansai Automation Level Meter // Level Switch // Flow Meter // Other Analyzer
http://www.kansai-automation.co.jp
We focused attention on level sensor technologies more than 35 years ago.
Nowadays, they receive a lot of attention as technologies critical to the expansion of industry, and we have obtained high credibility and evaluation as the “one of the best comprehensive manufacturer of level controls in the world.”
We will continuously make efforts to respond to needs for environmental conservation and safety measures and always be an enterprise that contributes to the international society in consideration of “control” and “safety.”
As new products (substances) are produced, the level sensor technologies make progress. We are diligently attempting to develop technologies and bring up world-class technological development and engineering personnel through technological education and cooperation with overseas brethren. Concerning sales, we are expanding the market by establishing distributors and affiliate companies. The advanced level sensor instruments produced from global technologies have obtained global marketing network.
http://www.kansai-automation.co.jp/eng/introduction/index.html
This standard rotary type level switch supports every condition.
As it can be handled easily, it is operated stably for a long term.
- High-temperature specifications and load bearing specifications are available.
Level switches under new categories have beeng produced from our long years of experiengces and technologies.
Due to the distinctive heart section, they have a durability three times as much as the rotary type level switches!
- As they do not have drive units such as gear and clutch, cost for internal parts replacemengt is reduced significantly!
This face-type level switch uses microwaves.
It is suitable for detecting dust, coal, gravels, granules, and so on!
- It is not easily affected by contamination, adhesion, and scale on the detection surface.
Various use applications are supported by lots of variations!
- This series needs no power source and catches liquid surfaces accurately.Various use applications are supported by lots of variations!
*1) In case of JIS20K50A Flange *2) In case of JIS10K50A Flange
http://www.kansai-automation.co.jp/eng/products/liquid/kf200.html
Various sizes and materials are available to support every process.
- As a read switch is used, it can be used at ease 10 million times or more.No power source is needed! Viscous liquids and high-temperature liquids can also be detected! As the moving part design is simple, stable operations are ensured. A liquid in a tank contacts the detecting pipe but does not touch the main body of the switch. Even highly viscous and cohesive liquids as well as high-temperature liquids that are difficult to detect through a float switch can be measured with relative ease.
No power source is needed!
Viscous liquids and high-temperature liquids can also be detected!
- As the moving part design is simple, stable operations are ensured.
The robust housing and various electrode materials of the liquid controller make it possible to measure various liquids!
[KF-650]
- Materials of the case and flange can be selected.
[KF-660・677・688]
[KFB-640]
http://www.kansai-automation.co.jp/eng/products/liquid/kf600.html
The capacitance type level switch detects level points of whatever kind of substances (powders, granules, lumps, liquids, pastes, bubbles, etc.).
More than 1,000 types of electrode shapes and special circuits are available for various applications.
http://www.kansai-automation.co.jp/eng/products/powder_liquid/aln_sl.html
The vibration type level switch stably detects even substances with variations of the relative permittivity and electrical properties.
- It detects even measured substances with variations of properties such as relative permittivity and moisture percentage.
http://www.kansai-automation.co.jp/eng/products/powder_liquid/kv.html
As the capacitance type level meter has no moving part, it can be maintained easily and operated stably for the long term. A sensor suitable for use conditions can be selected from among various types.
- Operates stably even during immersion
http://www.kansai-automation.co.jp/eng/products/contact/kli_klt_klg.html
The sounding type level meter has a robust housing and exerts an excellent durability under severe ambient conditions.
It can be used for various processes.
http://www.kansai-automation.co.jp/eng/products/contact/ksl.html
The radar type level meter irradiates microwaves via the probe and makes stable detection without being affected by dust particles, vapors, and obstacles in the tank.
- Can be used for powders, granules, liquids, slurries, etc.Resistant to change of properties and environments including vapors and gases, highly reliable, and easy to maintain.
- There are no moving parts excluding the float, with high reliability and ease of maintenance.http://www.kansai-automation.co.jp/eng/products/contact/kf100.html
Highly stable and reliable detections are realized by the excellent software!
Useful in various fields including long span, scanning, granule and liquid measurements.
http://www.kansai-automation.co.jp/eng/products/non-contact/ultrasonic_hyco.html
The laser type level meter recognizes obstacles in a tank as a digital image. Measurement in a detection area narrowed down more than ever before is enabled by cutting unnecessary noise and filtering the output adequately.
[LASER RANG-L]
- Maximum of 30 m can be measured.
[LASER RANG-S]
http://www.kansai-automation.co.jp/eng/products/non-contact/laser.html