The Liquid Controls Group (LCG) supports our customers worldwide with a 360° orientation around precision management of high-value fluids and gases. Our extensive line of Pumps, Compressors, Meters, Registers, Presets and Automation Software combine to provide a safe, productive and energy efficient transfer process for liquids and gases.
LCG products and services include a wide range of terminal industry solutions that can be custom integrated to fit your application and needs. For more information about LCG Integrated Terminal Solutions
Liquid Controls Group ผู้ผลิตมิเตอร์ LC Meter เป็นที่รู้จักในแวดวงอุตสาหกรรมมานานกว่า 45 ปีในประเทศไทย โดยผลิตภัณฑ์ของทาง Liquid Controls Group ประกอบไปด้วยอุปกรณ์วัดคุม สูบจ่ายและอุปกรณ์ควบคุมอย่างครบถ้วน เช่น
Liquid Controls Positive Displacement Flow Meters and Accessories
Meters provide exceptionally accurate service when using Liquid Controls' unique positive displacement metering principle, even under variable operating conditions (changes in temperature, pressure and viscosity). Provides the energy efficient and functional performance desired from an economical volumetric measuring instrument. Available with traditional mechanical seal or glandless magnetic driven pulse output device. A wide range of accessories are available to meet almost every metering need.
High accuracy and repeatability
Low maintenance, no metal-to-metal contact in measuring chamber
Low pressure loss, a true gravity flow meter
Choice of aluminum, cast iron, and stainless steel materials of construction
Self-contained operation without electrical power or signal conditioning (for units equipped with mechanical registers, printers or presets); no special piping requirements
Electronic output and registration equipment where enhanced accuracy and electronic communications are needed
Weights & Measures approval (world-wide) for custody transfer with mechanical or electronic registration systems meeting API standards
Electronic accessories designed and approved to Class 1 Div. 2 standards
Accuracy / Performance:
Electronic Registration Linearity:
Capable of ±0.10% over a 5:1 range
Capable of ±0.10% over a 10:1 range
Capable of ±0.15% over a 40:1 range
Mechanical Registration Linearity:
Capable of ±0.125% over a 5:1 range
Capable of ±0.22% over a 10:1 range
Capable of ±0.5% over a 40:1 range
Capable of 0.02% or better at any flow rate over entire range
Sizes: 1 1/2" through 6"
Flow Rates: 5 GPM through 1,000 GPM
End Connections: ANSI Flanged, NPT, BSPT, Slip Weld
M-Series and MA-Series Cast Case: 150 & 350 PSI non shock working pressure
MS-Series Two Case Steel Case: 150/150, 150/275, 300/300, 300/720 PSI; 600/1440 ANSI non-shock working pressure
For your complete Liquid and Gas Flow Measurement needs and increased accuracy, efficiency, and service life, Sponsler provides a complete line of high quality, precision turbine flowmeters to meet virtually all flow measurement applications. Sponsler flowmeters respond to factors such as viscosity, corrosive media, extreme temperature,and hazardous materials. Sponsler flowmeters are available in stainless steel, corrosive series and feature a hydraulically balanced turbine for rugged, compact constructionallows for the most accurate and reliable measurement available.
Sponsler will custom design flowmeters for your special needs whether for blending, batching, filling, totalizing, data logging, flow control loops, or other automated process control functions. Let Sponsler design a flow meter based measuring system tailored to your specifications.
The LCMag family of electromagnetic flow meters offers the best solution for measuring the flow of electrically conductive liquids (5µS/cm minimum). The sensor consists of a stainless steel pipe section internally lined with insulating material. PTFE, Polypropylene and Ebonite (hard rubber) liners are available. The two electrodes are positioned opposite each other on the internal surface of the pipe. The coils which generate the magnetic field are placed outside the pipe. The complete sensor has an external NEMA 6-6P (IP67/68) protection rating which guarantees the integrity of the magnetic circuit and protects the instrument against the external environment. The choice of materials in contact with the fluid (lining, electrodes, etc.) depends on the temperature, the chemical aggressiveness of the liquid and the degree of abrasion of the liquid.
·No moving parts
·Wide range of nominal diameters from 1/8" to 80"
·Wide range of flow rates from 0.11 GPM to 400,000 GPM
·Wide range of liner and electrode materials
·Near zero pressure drop
·Easy installation and operation
·Accuracy is not affected by fluid characteristics such as viscosity, density, temperature, or suspended solids
·Sizes: 1/8" through 72"
·Flow Rates: 0.11 through 400,000 GPM
·End Connections: ANSI Flanged, Wafer, Threaded, Tri - Clover (sanitary)
·Pressure Ratings: 150 - 300 ANSI
·Accuracy: Capable of ±0.2% of rate over 10:1 range for flow velocity between 6 to 33 feet per second
·Repeatability: Capable of 0.1% of full scale
·Certifications: HMS 2410 Series models 3-A certified.
The LectroCount™ LCR 600, the latest edition of Liquid Controls’ popular LectroCount™ line of electronic registers, is loaded with advanced functionalities that can produce real savings for your bottom line. New features—such as the large 5.7" QVGA display and the alphanumeric keyboard—enable valuable new functionalities like the full-featured point-of-sale (or POS, an optional upgrade), instant diagnostic messaging, and customized delivery screens. The LCR 600 is a standalone unit; no extraneous lap top or a lap pad is required. All configurations—including calibration, system setup, and point-of-sale (POS)—can be entered using the alphanumeric keypad.
REPEATABLILITY: Capable of .03% of reading over entire range. LINEARITY: Capable of ±0.10% or better over a 5:1 range from maximum nominal meter capacity. LINEARITY: Capable of ±0.10% or better over a 10:1 range from maximum nominal meter capacity. LINEARITY: Capable of ±0.15% or better over a 40:1 range from maximum nominal meter capacity.
Due to the capabilities of multi-point calibration for meters equipped with LectroCount™Electronic Registration, superior accuracy (linearity) can be provided as indicated above.
NOTE: Accuracy obtainable when all variables remain constant. Reading/ measurements must be equal to a minimum of one minute of flow at selected rate(s). All accuracy statements based on metering Stoddard Solvent, approximate viscosity 1 CPS. On higher viscosity products, the average deviation in accuracy will be even less.
Environmental: Enclosure: Class 1, Division 2, Group C&D design, Nema 4X Operating Temp Range: -40° to 158°F (-40° to 70°C)
Approvals: US Weights & Measures: LCR-II and LCR 600 Measurement Canada: LCR-II, LCR 600
Communications: RS232/485 Printer: Epson, Okidata and Blaster Models
Electrical: Power: +9 to 28VDC, 3A maximum (including solenoid valves)
Inputs: Temperature input: 4-Wire Platinum RTD Pulse Inputs: +5 to 28 volt peak to peak, open collector, single channel or quadrature
Outputs: Control Valve (2): Open drain transistor for 2 stage valve control, 1A Max. per channel Auxiliary (2): Open drain transistor for general purpose auxiliary control. Aux(1) 1A Max, Aux(2) 150mA Max Scaled Pulse Output: Open drain output, 1 A Max.
The PZ-Series sliding vane pumps are specifically designed for petroleum products and industrial solvents. Thisindustrial pump line is ideal for bulk pump loading and unloading, fuel oil delivery truck, and transport applications. Suitable liquids include petrochemicals, fuel oil, gasoline, biofuels, ethanol, solvents and many more.
Unlike the CP- and CD-models, they do not come with a replaceable cam; however, you can replace the sideplates. They have an adjustable internal relief valve and fewer mechanical sealing options than our CP- and CD-model pumps. Available in 2” and 2.5” sizes.
The Z-Series Coro-Vane® pumps, the newest line of sliding vane pumps offered by Corken, are designed with our patented needle roller thrust bearing rated for 4,000 lbs. The needle roller thrust bearings protects the pump against dynamic impact loads imposed on the pump by the drive system. Premature failures due to axial thrust loads are minimized on truck applications. They have O-ring construction throughout and are rated for 400 psi (28.6 bar) working pressure. Since the Z-models sliding vane pumps are used primarily in LPG (propane & butane) and agricultural ammonia applications, the non-adjustable internal relief valve is pre-set at the factory.
When the application requirements are suitable, Z-model pumps are a great option for many other liquefied gases with high vapor pressures such as natural gas liquids (NGLs), refrigerants, CO2, and many more. Applications include bulk pump transfer, propane delivery truck and transport. Available in 2”, 2.5”, 3” and 4” sizes.
MultiLoad II is a multi-arm, multi-meter, multi-product, multi-additive meter register. As a batch controller, MultiLoad II delivers straight product or multi-product recipes using ratio, sequential, and various hybrid blending methods. The MultiLoad II is a multi-solution batch controller and handles loading, dispensing, and tracking high value fluids and gases.
·Control up to 12 loading arms
·Up to 5 meters and 16 additives per arm
·Internal I/O options
·Scaled for 1-2 arm applications
·Modbus interface with Krohne mass meters
·Wireless communication options
·Alphanumeric keypad options
·Integrated card reader options
·Powerful stand-alone operation
MultiLoad II was designed to improve the traditional preset model by offering a number of key benefits, such as: ease of use, powerful stand-alone operation, seamless integration with automation systems, near limitless scalability, and powerful features.
·MultiLoad II eliminates the traditional card lock system with its built in card reader.
·MultiLoad II reads driver proximity cards.
·MultiLoad II replaces the traditional preset and meter registers.
·MultiLoad II replaces anywhere from one to twelve preset and meter registers depending on the customer’s unique needs.
·MultiLoad II saves time and money with anytime, anywhere access and remote control.
·24 hours a day, from anywhere in the world MultiLoad II can be accessed via the internet to view the real-time meter activity, logs, alarms, and configurations.
The Basic 500 Series Valve is a hydraulically-operated, diaphragm-actuated valve available in globe or angle patterns, a full range of sizes and various materials. It consists of three major components: a body, a cover and a diaphragm assembly. The diaphragm assembly is the only moving part. When pressure is applied above the diaphragm, a synthetic rubber disc, contained on three and one half sides by a disc retainer and disc guide, forms a seal with the valve seat. At the same time, the diaphragm assembly forms a sealed chamber in the upper portion of the valve, separating operating pressure from line pressure. The Basic 500 Series Valve’s rugged simplicity of design and packless construction assure a long life of dependable, trouble-free operation. Should the diaphragm become damaged, the valve closes tight providing “fail safe” operation. A versatile valve, the Basic 500 Series Valve is used in many types of piping systems requiring remote control, pressure regulation, solenoid operation, rate of flow control, liquid level control, or check valve operation.